The composition of silver alloy brazing materials can be rolled well from the cast ingot. These materials have high rolled strength, have good colour, and a melting point close to silver solder. However, when soldered, they have a slightly yellow colour. Nevertheless, they are suitable for gilding metals.
Silver brazing alloys are used in joining most engineering metals, including mild and stainless steel. However, they cannot be used with aluminium alloys. For this reason, they must be used with care. Fortunately, there are several types of silver brazing alloys available. In this article, we will look at some of the different types and where they can be used.
Silver alloys can be used in joining copper, brass, and steel. They exhibit a low melting point and good flowability. These materials are available in various forms, such as wire and rods, wire flattening, preforms, and spheres. You can use these brazing materials for any application where a strong and neat joint is required.
Silver brazing is best performed using an oxyacetylene process, in which the flame is cooled down to a temperature lower than the base metal. This helps to minimize the stress that results from the joining process. Moreover, silver brazing materials should be used with flux.feihongalloys.com